Install A Mobile Phone Protective Cover To Reduce The Chance Of Water in The Mobile Phone

It doesn’t matter if your phone falls into the water. It doesn’t matter. Now, let’s introduce the effective treatment methods for Apple mobile phone users after the water has fallen.

We divide the situation into 3 types: 1. Falling into clean water when power is on; 2. Falling into non-corrosive liquid when power is off; 3. Falling into non-clean water when power is on, or whether it is powered on or not Drop into corrosive liquid or viscous liquid or other clean liquid.

First of all, for the first and second cases, we must not think that the machine has been scrapped. Don't think that it has been flooded anyway, just dismantle it indiscriminately. Below I will give a little bit of my personal suggestion corresponding to various situations. When the electricity is turned on, it will fall into clean water. In this case, it is generally not necessary to disassemble the machine. Turn off the power as soon as possible and shake it dry, but don't shake the machine off. The idea is to shake the water out of the screen. If water droplets remain on the screen, there will be traces after drying. Place it under a light source of heat such as desk lamps, spotlights, etc. to let the water dissipate slowly. This process takes more than six hours. Do not use strong heat sources such as hair dryers in a hurry. After these three steps of processing, the power supply can basically work normally.

Drop into non-corrosive liquid in case of power failure. In this case, it can be basically assumed that the machine is not damaged. But the LCD screen may be ugly. Shake it hard, but don't shake the machine off. If there are no traces on the LCD screen, follow the third point of the first point to deal with. If there is something left on the screen and it is serious, do not deal with it according to point 3, because the electronic circuit after such treatment can work normally, but the screen may be ugly. It can be sent to the nearest maintenance department for processing or the machine can be disassembled for cleaning.

When it is energized, it drops into non-clean water, or drops into corrosive or viscous liquid or other clean liquids regardless of whether it is energized or not. This situation is the most troublesome. But the chances of machine recovery after proper treatment are also great. Cut off the power as soon as possible. If it falls into corrosive liquid (such as sea water), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside, and disassemble the machine as soon as possible. But take your time when disassembling the machine, clean it with alcohol or professional washing water, or hand the whole pile of things you disassembled to the repair point, and let the repair point clean and assemble again for you.

Installing a mobile phone protective cover for your phone can reduce the chance of water entering the mobile phone. If only a small amount of water splashes on the mobile phone, remove the mobile phone protective cover and wipe it dry with a paper towel.